chore: 适配 sing-box v1.14

README.md

@@ -54,6 +54,7 @@ apt install -y curl wget curl
 7. 修改端口
 8. 更新镜像
 9. 更新脚本
+10. 开启BBR加速
 输入您的选择:
 ```
 

bin/bbr.sh

@@ -0,0 +1,71 @@
+# 开启BBR加速
+enable_kernel_bbr(){
+    if [ "$(id -u)" -ne 0 ]; then
+        echo "请使用 root 权限运行该操作"
+        return 1
+    fi
+
+    # 检测容器环境
+    local virt_type=""
+    if command -v systemd-detect-virt >/dev/null 2>&1; then
+        virt_type=$(systemd-detect-virt 2>/dev/null)
+    fi
+
+    case "$virt_type" in
+        lxc|openvz|docker|podman|container-other)
+            echo "检测到当前运行于容器环境: $virt_type"
+            echo "请在宿主机开启 BBR"
+            return 1
+            ;;
+    esac
+
+    if [ "$(sysctl -n net.ipv4.tcp_congestion_control 2>/dev/null)" = "bbr" ]; then
+        echo "BBR加速 已经开启，无需重复操作"
+        return 0
+    fi
+
+    # 尝试加载 bbr 模块（新内核可能已内建）
+    if command -v modprobe >/dev/null 2>&1; then
+        modprobe tcp_bbr 2>/dev/null || true
+    fi
+
+    # 检查内核是否支持 BBR
+    if ! sysctl net.ipv4.tcp_available_congestion_control 2>/dev/null | grep -qw bbr; then
+        echo "当前系统内核不支持 BBR"
+        return 1
+    fi
+
+    set_sysctl_conf(){
+        local key="$1"
+        local value="$2"
+        local file="/etc/sysctl.conf"
+
+        touch "$file"
+
+        # 转义 key，避免 . 被 grep/sed 当作正则
+        local escaped_key
+        escaped_key=$(printf '%s\n' "$key" | sed 's/[.[\*^$()+?{|]/\\&/g')
+
+        if grep -qE "^[[:space:]]*#?[[:space:]]*$escaped_key[[:space:]]*=" "$file"; then
+            sed -i "s|^[[:space:]]*#\?[[:space:]]*$escaped_key[[:space:]]*=.*|$key = $value|" "$file"
+        else
+            echo "$key = $value" >> "$file"
+        fi
+    }
+
+    # 写入配置
+    set_sysctl_conf "net.core.default_qdisc" "fq"
+    set_sysctl_conf "net.ipv4.tcp_congestion_control" "bbr"
+
+    # 立即生效
+    sysctl -w net.core.default_qdisc=fq >/dev/null 2>&1
+    sysctl -w net.ipv4.tcp_congestion_control=bbr >/dev/null 2>&1
+
+    # 验证是否成功
+    if [ "$(sysctl -n net.ipv4.tcp_congestion_control 2>/dev/null)" = "bbr" ]; then
+        echo "BBR加速 已开启"
+    else
+        echo "BBR开启失败"
+        return 1
+    fi
+}

bin/create_config_hysteria.sh

@@ -2,8 +2,7 @@
 
 
 create_hysteria_config(){
-    local SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"  # 脚本文件夹绝对路径
+    local CONFIG_DIR="${1}" # 配置文件目录
-    local CONFIG_FILE="$SCRIPT_DIR/../config/config.json"
 
     echo "请选择配置类型:"
     echo "1. Hysteria 自签名证书配置"
@@ -13,11 +12,11 @@ create_hysteria_config(){
     case $CHOICE in
         1)
             echo "重置为hysteria自签名证书配置..."
-            create_hysteria_self_tls_config
+            create_hysteria_self_tls_config $CONFIG_DIR
             ;;
         2)
             echo "重置为hysteria acme tls证书配置..."
-            create_hysteria_acme_tls_config
+            create_hysteria_acme_tls_config $CONFIG_DIR
             ;;
         *)
             echo "无效的选择, 请重新选择."
@@ -26,42 +25,42 @@ create_hysteria_config(){
 }
 
 create_hysteria_self_tls_config() {
-    local SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"  # 脚本文件夹绝对路径
+    local CONFIG_DIR="${1}" # 配置文件目录
-    local CONFIG_FILE="$SCRIPT_DIR/../config/config.json"
+    local CONFIG_FILE="$CONFIG_DIR/config.json"
 
-    cp "$SCRIPT_DIR/../config/template/hysteria/hysteria_self_tls_config.json" "$CONFIG_FILE"
+    cp "$CONFIG_DIR/template/hysteria/hysteria_self_tls_config.json" "$CONFIG_FILE"
 
     # 生成自签名证书和设置域名
     update_self_tls "$CONFIG_FILE" "bing.com"
     
     # 设置端口
-    update_port
+    update_port "$CONFIG_FILE"
 
     # 设置密码
-    update_password
+    update_password "$CONFIG_FILE"
 
     # 设置混淆密码
-    update_obfs_password
+    update_obfs_password "$CONFIG_FILE"
 
     green "成功创建配置"
 }
 
 create_hysteria_acme_tls_config() {
-    local SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"  # 脚本文件夹绝对路径
+    local CONFIG_DIR="${1}" # 配置文件目录
-    local CONFIG_FILE="$SCRIPT_DIR/../config/config.json"
+    local CONFIG_FILE="$CONFIG_DIR/config.json"
 
-    cp "$SCRIPT_DIR/../config/template/hysteria/hysteria_acme_tls_config.json" "$CONFIG_FILE"
+    cp "$CONFIG_DIR/template/hysteria/hysteria_acme_tls_config.json" "$CONFIG_FILE"
 
     update_acme_tls "$CONFIG_FILE"
     
     # 设置端口
-    update_port
+    update_port "$CONFIG_FILE"
 
     # 设置密码
-    update_password
+    update_password "$CONFIG_FILE"
 
     # 设置混淆密码
-    update_obfs_password
+    update_obfs_password "$CONFIG_FILE"
 
     green "成功创建配置"
 }

bin/create_config_tuic.sh

@@ -2,8 +2,7 @@
 
 
 create_tuic_config(){
-    local SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"  # 脚本文件夹绝对路径
+    local CONFIG_DIR="${1}" # 配置文件目录
-    local CONFIG_FILE="$SCRIPT_DIR/../config/config.json"
 
     echo "请选择配置类型:"
     echo "1. Tuic 自签名证书配置"
@@ -13,11 +12,11 @@ create_tuic_config(){
     case $CHOICE in
         1)
             echo "重置为 tuic 自签名证书配置..."
-            create_tuic_self_tls_config
+            create_tuic_self_tls_config $CONFIG_DIR 
             ;;
         2)
             echo "重置为 tuic acme tls证书配置..."
-            create_tuic_acme_tls_config
+            create_tuic_acme_tls_config $CONFIG_DIR 
             ;;
         *)
             echo "无效的选择, 请重新选择."
@@ -26,8 +25,7 @@ create_tuic_config(){
 }
 
 create_tuic_acme_tls_config() {
-    local SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)" # 脚本文件夹绝对路径
+    local CONFIG_DIR="${1}" # 配置文件目录
-    local CONFIG_DIR="$SCRIPT_DIR/../config"
     local CONFIG_FILE="$CONFIG_DIR/config.json"
 
     cp "$CONFIG_DIR/template/tuic/tuic_acme_tls_config.json" "$CONFIG_FILE"
@@ -35,34 +33,34 @@ create_tuic_acme_tls_config() {
     update_acme_tls "$CONFIG_FILE"
     
     # 设置端口
-    update_port
+    update_port "$CONFIG_FILE"
 
     # 设置密码
-    update_password
+    update_password "$CONFIG_FILE"
 
     # 设置UUID
-    update_uuid
+    update_uuid "$CONFIG_FILE"
     
     green "成功创建配置"
 }
 
 create_tuic_self_tls_config() {
-    local SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"  # 脚本文件夹绝对路径
+    local CONFIG_DIR="${1}"
-    local CONFIG_FILE="$SCRIPT_DIR/../config/config.json"
+    local CONFIG_FILE="$CONFIG_DIR/config.json"
 
-    cp "$SCRIPT_DIR/../config/template/tuic/tuic_self_tls_config.json" "$CONFIG_FILE"
+    cp "$CONFIG_DIR/template/tuic/tuic_self_tls_config.json" "$CONFIG_FILE"
 
     # 生成自签名证书和设置域名
     update_self_tls "$CONFIG_FILE" "bing.com"
     
     # 设置端口
-    update_port
+    update_port "$CONFIG_FILE"
 
     # 设置密码
-    update_password
+    update_password "$CONFIG_FILE"
 
     # 设置UUID
-    update_uuid
+    update_uuid "$CONFIG_FILE"
 
     green "成功创建配置"
 }

bin/docker.sh

@@ -4,6 +4,7 @@
 restart_docker() {
     local SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"  # 脚本文件夹绝对路径
     local COMPOSE_FILE="$SCRIPT_DIR/../docker-compose.yml"
+    check_docker_compose_file $COMPOSE_FILE
 
     # 如果容器未运行，提示启动
     local RUNNING_COUNT=$(docker compose -f $COMPOSE_FILE ps -q | wc -l)
@@ -30,12 +31,7 @@ restart_docker() {
 update_docker_images(){
     local SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"  # 脚本文件夹绝对路径
     local COMPOSE_FILE="$SCRIPT_DIR/../docker-compose.yml" # docker-compose.yml文件路径
-
+    check_docker_compose_file $COMPOSE_FILE
-    # 检查是否存在 docker-compose.yml 文件
-    if [ ! -f $COMPOSE_FILE ]; then
-        echo "Error: docker-compose.yml 文件不存在."
-        exit 1
-    fi
 
     echo "正在关闭容器.."
     docker compose -f $COMPOSE_FILE down
@@ -49,3 +45,39 @@ update_docker_images(){
     echo "正在启动容器.."
     docker compose -f $COMPOSE_FILE up -d
 }
+
+
+run() {
+    check_docker_compose
+
+    local SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"  # 脚本文件夹绝对路径
+    local COMPOSE_FILE="$SCRIPT_DIR/../docker-compose.yml"
+    check_docker_compose_file $COMPOSE_FILE
+    
+    # 如果容器已经启动, 则先停止容器
+    if docker compose -f "$COMPOSE_FILE" ps | grep -q "Up"; then
+        docker compose -f "$COMPOSE_FILE" down
+    fi
+
+    # 启动docker容器
+    docker compose -f "$COMPOSE_FILE" up -d
+}
+
+
+# 检查docker版本是否支持docker compose子命令
+check_docker_compose(){
+    # 检查 docker compose 子命令是否可用
+    if ! docker compose version &>/dev/null; then
+        echo "Docker 不支持 'compose' 子命令，请升级 Docker"
+        exit 1
+    fi
+}
+
+check_docker_compose_file(){
+    local COMPOSE_FILE=${1}
+    # 检查是否存在 docker-compose.yml 文件
+    if [ ! -f $COMPOSE_FILE ]; then
+        echo "Error: docker-compose.yml 文件不存在."
+        exit 1
+    fi
+}

bin/password.sh

@@ -2,30 +2,49 @@
 
 # 更新密码的函数
 update_password() {
-    local SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"  # 脚本文件夹绝对路径
+    local CONFIG_FILE="${1}"
-    local CONFIG_FILE="$SCRIPT_DIR/../config/config.json"
+
-    
+    if [[ -z "$CONFIG_FILE" ]]; then
-    
+        echo "[Error] config_file配置文件路径 不能为空"
+        return 1
+    fi
+
     # 生成一个长度为16的随机密码
-    local NEW_PASSWORD=$(gen_password 16)
+    local NEW_PASSWORD
-    
+    NEW_PASSWORD=$(gen_password 16)
+
     # 修改密码
-    sed -i 's/你的密码/'"$NEW_PASSWORD"'/g' $CONFIG_FILE
+    sed -i 's/你的密码/'"$NEW_PASSWORD"'/g' "$CONFIG_FILE"
-    
+
     echo "设置密码成功"
 }
 
 # 更新混淆密码
 update_obfs_password() {
-    local SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"  # 脚本文件夹绝对路径
+    local CONFIG_FILE="${1}"
-    local CONFIG_FILE="$SCRIPT_DIR/../config/config.json"
+
-    
+    if [[ -z "$CONFIG_FILE" ]]; then
-    
+        echo "[Error] config_file配置文件路径 不能为空"
+        return 1
+    fi
+
     # 生成一个长度为16的随机密码
-    local NEW_PASSWORD=$(gen_password 16)
+    local NEW_PASSWORD
-    
+    NEW_PASSWORD=$(gen_password 16)
+
     # 修改密码
-    sed -i 's/你的混淆密码/'"$NEW_PASSWORD"'/g' $CONFIG_FILE
+    sed -i 's/你的混淆密码/'"$NEW_PASSWORD"'/g' "$CONFIG_FILE"
-    
+
     echo "设置密码成功"
 }
+
+# 生成密码
+gen_password() {
+    local PASS_LENGTH=$1  # 密码长度作为第一个参数
+    local CHARS='[:alnum:]'  # 只允许出现字母和数字
+
+    local RAND
+    RAND=$(< /dev/urandom tr -dc "$CHARS" | head -c "$PASS_LENGTH")
+
+    echo "$RAND"
+}

bin/port.sh

@@ -2,21 +2,25 @@
 
 # ==========================================
 # 更新 sing-box 配置文件中的监听端口，并开放对应防火墙规则
-# 参数: 端口号（可选，不传则设置一个5000 到 15000的空闲端口）
+# 参数1: 配置文件路径
+# 参数2: 端口号（可选，不传则设置一个5000 到 15000的空闲端口）
 # --- 使用示例 ---
 # 指定端口
-# update_port 8080
+# update_port "$CONFIG_FILE" 8080
 # ==========================================
 update_port(){
-  local PORT=$1
+  local CONFIG_FILE="$1"
+  local PORT="$2"
+  if [[ -z "$CONFIG_FILE" ]]; then
+    echo "[Error] config_file配置文件路径 不能为空"
+    return 1
+  fi
   # 如果没有提供端口参数，则自动查找一个随机空闲端口
   if [[ -z "$PORT" ]]; then
     PORT=$(find_free_port 5000 15000)
-  fi 
+  fi
 
-  local SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"  # 脚本文件夹绝对路径
+  modify_json_file "$CONFIG_FILE" ".inbounds[0].listen_port" "$PORT"
-  local CONFIG_DIR="$SCRIPT_DIR/../config"
-  modify_json_file "$CONFIG_DIR/config.json" ".inbounds[0].listen_port" "$PORT"
   port_manage allow "$PORT"
   echo "设置端口成功"
 }
@@ -187,18 +191,26 @@ port_manage() {
 
 # 通过交互方式更新端口
 ask_update_port(){
-    local SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+    local CONFIG_FILE="${1}"
-    local CONFIG_FILE="$SCRIPT_DIR/../config/config.json"
 
-    local CURRENT_PORT=$(get_listen_port)
+    if [[ -z "$CONFIG_FILE" ]]; then
+        echo "[Error] config_file配置文件路径 不能为空"
+        return 1
+    fi
+
+    local CURRENT_PORT=$(get_listen_port "$CONFIG_FILE")
     local NEW_PORT=$(ask_update "请输入新的端口号" "$CURRENT_PORT")
-    update_port "$NEW_PORT"
+    update_port "$CONFIG_FILE" "$NEW_PORT"
 }
 
 # 获取当前配置的监听端口
 get_listen_port(){
-    local SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+    local CONFIG_FILE="${1}"
-    local CONFIG_FILE="$SCRIPT_DIR/../config/config.json"
+
+    if [[ -z "$CONFIG_FILE" ]]; then
+        echo "[Error] config_file配置文件路径 不能为空"
+        return 1
+    fi
 
     local PORT=$(jq -r ".inbounds[0].listen_port" "$CONFIG_FILE")
     echo $PORT

bin/print_share_link.sh

@@ -4,18 +4,16 @@ print_share_link() {
   # 检查jq是否安装
   check_jq
 
-  local SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"  # 脚本文件夹绝对路径
+  local CONFIG_FILE=${1}
-  local CONFIG_DIR=$(readlink -f "$SCRIPT_DIR/../config")
-  local CONFIG_FILE="$CONFIG_DIR/config.json"
 
   local TYPE=$(jq -r '.inbounds[0].type' "$CONFIG_FILE")
   if [ "$TYPE" = "tuic" ]; then
-    print_tuic_share_link
+    print_tuic_share_link "$CONFIG_FILE"
     return 0
   fi
 
   if [ "$TYPE" = "hysteria2" ]; then
-    print_hysteria_share_link
+    print_hysteria_share_link  "$CONFIG_FILE"
     return 0
   fi
 
@@ -23,9 +21,7 @@ print_share_link() {
 }
 
 print_tuic_share_link() {
-    local SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"  # 脚本文件夹绝对路径
+    local CONFIG_FILE=${1} # 配置文件路径
-    local CONFIG_DIR=$(readlink -f "$SCRIPT_DIR/../config")
-    local CONFIG_FILE="$CONFIG_DIR/config.json"
     
     # 检查配置是否正确
     local UUID=$(jq -r '.inbounds[0].users[0].uuid' "$CONFIG_FILE")
@@ -71,42 +67,40 @@ print_tuic_share_link() {
 
 
 print_hysteria_share_link(){
-    local script_dir="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+    local CONFIG_FILE=${1} # 配置文件路径
-    local config_dir=$(readlink -f "$script_dir/../config")
+    local INSECURE=1
-    local config_file="$config_dir/config.json"
+    local ALLOW_INSECURE=1
-    local insecure=1
-    local allow_insecure=1
     
     # 检查是否使用ACME申请证书
-    if is_config_use_acme "$config_file"; then
+    if is_config_use_acme "$CONFIG_FILE"; then
-        allow_insecure=0 # 不跳过证书验证
+        ALLOW_INSECURE=0 # 不跳过证书验证
-        insecure=0
+        INSECURE=0
     fi
 
     # 读取配置文件内容
-    local config=$(cat "$config_file")
+    local CONFIG=$(cat "$CONFIG_FILE")
     
     # 提取所需信息
-    local ipv4=$(curl -4 -sSL --connect-timeout 3 --retry 2 ip.sb || echo "null")
+    local IPV4=$(curl -4 -sSL --connect-timeout 3 --retry 2 ip.sb || echo "null")
-    local port=$(echo "$config" | jq -r '.inbounds[0].listen_port')
+    local PORT=$(echo "$CONFIG" | jq -r '.inbounds[0].listen_port')
-    local sni=$(echo "$config" | jq -r '.inbounds[0].tls.server_name')
+    local SNI=$(echo "$CONFIG" | jq -r '.inbounds[0].tls.server_name')
-    local password=$(echo "$config" | jq -r '.inbounds[0].users[0].password')
+    local PASSWORD=$(echo "$CONFIG" | jq -r '.inbounds[0].users[0].password')
-    local obfs_type=$(echo "$config" | jq -r '.inbounds[0].obfs.type')
+    local OBFS_TYPE=$(echo "$CONFIG" | jq -r '.inbounds[0].obfs.type')
-    local obfs_password=$(echo "$config" | jq -r '.inbounds[0].obfs.password')
+    local OBFS_PASSWORD=$(echo "$CONFIG" | jq -r '.inbounds[0].obfs.password')
     
     # 构建分享链接
-    local share_link="hysteria2://${password}@${ipv4}:${port}/?sni=${sni}&insecure=${insecure}&obfs=${obfs_type}&obfs-password=${obfs_password}&allowInsecure=${allow_insecure}#Hysteria2节点"
+    local SHARE_LINK="hysteria2://${PASSWORD}@${IPV4}:${PORT}/?sni=${SNI}&insecure=${INSECURE}&obfs=${OBFS_TYPE}&obfs-password=${OBFS_PASSWORD}&allowInsecure=${ALLOW_INSECURE}#Hysteria2节点"
     
     # 输出分享链接
     echo -e "\033[32m"
-    echo "IPV4: $ipv4"
+    echo "IPV4: $IPV4"
-    echo "port: $port"
+    echo "port: $PORT"
-    echo "password: $password"
+    echo "password: $PASSWORD"
-    echo "sni: $sni"
+    echo "sni: $SNI"
-    echo "obfs_type: $obfs_type"
+    echo "obfs_type: $OBFS_TYPE"
-    echo "obfs_password(混淆密码): $obfs_password"
+    echo "obfs_password(混淆密码): $OBFS_PASSWORD"
     echo ""
-    echo "分享链接: $share_link"
+    echo "分享链接: $SHARE_LINK"
     echo -e "\033[0m"
 }
 

bin/run.sh

@@ -1,15 +0,0 @@
-#!/bin/bash
-
-run() {
-    local SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"  # 脚本文件夹绝对路径
-    local COMPOSE_FILE="$SCRIPT_DIR/../docker-compose.yml"
-    
-    # 如果容器已经启动, 则先停止容器
-    if docker compose -f "$COMPOSE_FILE" ps | grep -q "Up"; then
-        docker compose -f "$COMPOSE_FILE" down
-    fi
-
-    # 启动docker容器
-    docker compose -f "$COMPOSE_FILE" up -d
-}
-

bin/tls.sh

@@ -18,13 +18,12 @@ create_self_tls_file() {
 }
 
 update_self_tls(){
-    local CONFIG_FILE="${1:-}"
+    local CONFIG_FILE="${1}" # 配置文件
-    local DOMAIN="${2:-bing.com}"   # 域名，默认为bing.com
+    local DOMAIN="${2}"   # 域名
 
     if [[ -z "$CONFIG_FILE" ]]; then
-        local SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"  # 脚本文件夹绝对路径
+        echo "[Error] config_file配置文件路径 不能为空"
-        local CONFIG_DIR=$(readlink -f "$SCRIPT_DIR/../config")
+        return 1
-        CONFIG_FILE="$CONFIG_DIR/config.json"
     fi
 
     # 生成自签名证书, 设置域名
@@ -33,19 +32,18 @@ update_self_tls(){
 }
 
 update_acme_tls(){
-    local CONFIG_FILE="${1:-}"
+    local CONFIG_FILE="${1}" # 配置文件
 
     if [[ -z "$CONFIG_FILE" ]]; then
-        local SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"  # 脚本文件夹绝对路径
+        echo "[Error] config_file配置文件路径 不能为空"
-        local CONFIG_DIR=$(readlink -f "$SCRIPT_DIR/../config")
+        return 1
-        CONFIG_FILE="$CONFIG_DIR/config.json"
     fi
 
     # 获取邮箱
     local USER_EMAIL
     read -p "请输入你的邮箱: " USER_EMAIL
     while [[ -z "$USER_EMAIL" ]]; do
-        echo "[错误] 邮箱不能为空"
+        echo "[Error] 邮箱不能为空"
         read -p "请输入你的邮箱: " USER_EMAIL
     done
     
@@ -53,7 +51,7 @@ update_acme_tls(){
     local USER_DOMAIN
     read -p "请输入你的域名 (例如: example.com): " USER_DOMAIN
     while [[ -z "$USER_DOMAIN" ]]; do
-        echo "[错误] 域名不能为空"
+        echo "[Error] 域名不能为空"
         read -p "请输入你的域名: " USER_DOMAIN
     done
     
@@ -61,7 +59,7 @@ update_acme_tls(){
     local CLOUDFLARE_TOKEN
     read -p "请输入你的 Cloudflare API Token: " CLOUDFLARE_TOKEN
     while [[ -z "$CLOUDFLARE_TOKEN" ]]; do
-        echo "[错误] Cloudflare API Token 不能为空"
+        echo "[Error] Cloudflare API Token 不能为空"
         read -p "请输入你的 Cloudflare API Token: " CLOUDFLARE_TOKEN
     done
     
@@ -74,11 +72,19 @@ update_acme_tls(){
 update_acme_domain(){
     local CONFIG_FILE="${1}" # 配置文件
     local DOMAIN="${2}"   # 域名
-    modify_json_file  "$CONFIG_FILE" ".inbounds[0].tls.acme.domain[0]" "$DOMAIN"
+    if [[ -z "$CONFIG_FILE" ]]; then
+        echo "[Error] config_file配置文件路径 不能为空"
+        return 1
+    fi
+    modify_json_file  "$CONFIG_FILE" ".inbounds[0].tls.certificate_provider.domain[0]" "$DOMAIN"
 }
 
 update_server_name(){
     local CONFIG_FILE="${1}" # 配置文件
     local DOMAIN="${2}"   # 域名
+    if [[ -z "$CONFIG_FILE" ]]; then
+        echo "[Error] config_file配置文件路径 不能为空"
+        return 1
+    fi
     modify_json_file  "$CONFIG_FILE" ".inbounds[0].tls.server_name" "$DOMAIN"
-}
+}

bin/utils/base.sh

@@ -54,16 +54,6 @@ check_jq() {
     fi
 }
 
-# 生成密码
-gen_password() {
-    local PASS_LENGTH=$1  # 密码长度作为第一个参数
-    local CHARS='[:alnum:]'  # 只允许出现字母和数字
-
-    local RAND
-    RAND=$(< /dev/urandom tr -dc "$CHARS" | head -c "$PASS_LENGTH")
-
-    echo "$RAND"
-}
 
 # URL编码
 url_encode() {

bin/uuid.sh

@@ -1,11 +1,16 @@
 #!/bin/bash
 
 update_uuid(){
-  local SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"  # 脚本文件夹绝对路径
+  local CONFIG_FILE="${1}"
-  local CONFIG_FILE="$SCRIPT_DIR/../config/config.json"
+
+  if [[ -z "$CONFIG_FILE" ]]; then
+    echo "[Error] config_file配置文件路径 不能为空"
+    return 1
+  fi
 
   # 生成 UUID
-  local UUID=$(cat /proc/sys/kernel/random/uuid)
+  local UUID
+  UUID=$(cat /proc/sys/kernel/random/uuid)
 
   # 修改 UUID
   sed -i 's/你的UUID/'"$UUID"'/g' "$CONFIG_FILE"

config/template/hysteria/hysteria_acme_tls_config.json

@@ -26,7 +26,8 @@
         "enabled": true,
         "server_name": "你的域名",
         "alpn": ["h3"],
-        "acme": {
+        "certificate_provider": {
+          "type":"acme",
           "domain": ["你的域名"],
           "email": "你的邮箱",
           "data_directory": "/etc/sing-box/tls/acme",

config/template/tuic/tuic_acme_tls_config.json

@@ -25,7 +25,8 @@
         "enabled": true,
         "server_name": "你的域名",
         "alpn": ["h3"],
-        "acme": {
+        "certificate_provider": {
+          "type": "acme",
           "domain": ["你的域名"],
           "email": "你的邮箱",
           "data_directory": "/etc/sing-box/tls/acme",

docker-compose.yml.bak

@@ -0,0 +1,11 @@
+services:
+  sing-box:
+    image: ghcr.io/sagernet/sing-box:v1.14.0-alpha.26
+    container_name: ${COMPOSE_PROJECT_NAME}
+    restart: unless-stopped
+    network_mode: host
+    volumes:
+      - ./config/config.json:/etc/sing-box/config.json
+      - ./tls:/etc/sing-box/tls
+      - ./logs:/var/log/sing-box       
+    command: -C /etc/sing-box run

install.sh

@@ -36,16 +36,16 @@ install(){
 
 # 查询运行状态
 check_container_status(){
-    local compose_file="./docker-compose.yml"
+    local COMPOSE_FILE="./docker-compose.yml"
 
     local GREEN='\033[0;32m'
     local RED='\033[0;31m'
     local RESET='\033[0m'
 
-    local status
+    local STATUS
-    status=$(docker compose -f "$compose_file" ps --status running --quiet 2>/dev/null)
+    STATUS=$(docker compose -f "$COMPOSE_FILE" ps --status running --quiet 2>/dev/null)
 
-    if [ -n "$status" ]; then
+    if [ -n "$STATUS" ]; then
         echo -e "${GREEN}运行中${RESET}"
     else
         echo -e "${RED}未运行${RESET}"
@@ -54,8 +54,7 @@ check_container_status(){
 
 # 修改域名
 ask_update_domain(){
-  local SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)/bin"  # 脚本文件夹绝对路径
+  local CONFIG_FILE="${1}"
-  local CONFIG_FILE="$SCRIPT_DIR/../config/config.json"
   
   # 检查jq是否安装
   check_jq
@@ -86,8 +85,7 @@ ask_update_domain(){
 
 # 检查配置文件
 check_config_file(){
-    local SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)/bin"  # 脚本文件夹绝对路径
+    local CONFIG_FILE="${1}" # 配置文件
-    local CONFIG_FILE="$SCRIPT_DIR/../config/config.json"
 
     # 检查配置文件是否存在
     if [ ! -e  "$CONFIG_FILE" ]; then
@@ -105,7 +103,8 @@ check_config_file(){
 # 创建配置文件
 create_config(){
     local SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)/bin"  # 脚本文件夹绝对路径
-    local CONFIG_FILE="$SCRIPT_DIR/../config/config.json"
+    local CONFIG_DIR="$SCRIPT_DIR/../config"
+    local CONFIG_FILE="$CONFIG_DIR/config.json"
 
     # 如果配置文件已存在，提示用户是否重新生成
     if [ -e "$CONFIG_FILE" ]; then
@@ -124,10 +123,10 @@ create_config(){
     read -p "输入您的选择: " CHOICE
     case $CHOICE in
         1)
-            create_tuic_config
+            create_tuic_config $CONFIG_DIR
             ;;
         2)
-            create_hysteria_config
+            create_hysteria_config $CONFIG_DIR
             ;;
         *)
             echo "无效的选择, 请重新选择."
@@ -136,10 +135,13 @@ create_config(){
 }
 
 main(){
-    local container_status=$(check_container_status)
+    local SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)/bin"  # 脚本文件夹绝对路径
+    local CONFIG_FILE="$SCRIPT_DIR/../config/config.json"
+  
+    local CONTAINER_STATUS=$(check_container_status)
     # 显示菜单
     echo ""
-    echo 运行状态: $container_status
+    echo 运行状态: $CONTAINER_STATUS
     echo "=============================="
     echo "请选择一个操作:"
     echo "1. 一键部署"
@@ -151,20 +153,21 @@ main(){
     echo "7. 修改端口"
     echo "8. 更新镜像"
     echo "9. 更新脚本"
+    echo "10. 开启BBR加速"
 
     # 读取用户选择
-    local choice
+    local CHOICE
-    read -p "输入您的选择: " choice
+    read -p "输入您的选择: " CHOICE
 
     # 根据用户选择执行相应的操作
-    case $choice in
+    case $CHOICE in
         1)
             # 一键部署
             install
             create_config
-            port_manage allow $(get_listen_port) # 开放端口
+            port_manage allow $(get_listen_port  "$CONFIG_FILE") # 开放端口
             run 
-            print_share_link
+            print_share_link  "$CONFIG_FILE"
             ;;
         2)
             # 生成配置 / 重置配置
@@ -172,19 +175,19 @@ main(){
             ;;
         3)
             # 查看分享链接
-            check_config_file
+            check_config_file  "$CONFIG_FILE"
-            print_share_link
+            print_share_link  "$CONFIG_FILE"
             ;;
         4)
             # 启动
-            check_config_file
+            check_config_file  "$CONFIG_FILE"
-            port_manage allow $(get_listen_port) # 开放端口
+            port_manage allow $(get_listen_port  "$CONFIG_FILE") # 开放端口
             run
-            print_share_link
+            print_share_link "$CONFIG_FILE"
             ;;
         5)
             # 停止
-            if echo "$container_status" | grep -q "未运行"; then
+            if echo "$CONTAINER_STATUS" | grep -q "未运行"; then
                 echo "程序已停止"
                 return
             fi
@@ -192,15 +195,15 @@ main(){
             ;;
         6)
             # 修改域名
-            check_config_file
+            check_config_file  "$CONFIG_FILE"
-            ask_update_domain
+            ask_update_domain  "$CONFIG_FILE"
             restart_docker
             ;;
         7)
             # 修改端口
-            check_config_file
+            check_config_file  "$CONFIG_FILE"
-            ask_update_port
+            ask_update_port "$CONFIG_FILE"
-            port_manage allow $(get_listen_port) # 开放端口
+            port_manage allow $(get_listen_port  "$CONFIG_FILE") # 开放端口
             restart_docker
             ;;
         8)
@@ -212,6 +215,10 @@ main(){
             # 更新脚本
             git pull
             ;;
+        10)
+            # 开启BBR加速
+            enable_kernel_bbr
+            ;;
         *)
             echo "无效的选择, 请重新选择."
             ;;