immortalwrt_image_builder/r2s.sh

#!/bin/bash
set -e

# 安装 Image Builder 构建所需依赖
install_dependencies() {
  sudo apt install -y build-essential libncurses-dev zlib1g-dev gawk git \
    gettext libssl-dev xsltproc rsync wget unzip python3 qemu-utils mkisofs zstd
}

# 下载并解压 FriendlyARM NanoPi R2S 的 Image Builder
# 参数 1: ImmortalWrt 版本号，例如 25.12.1
# 输出: 解压后的 Image Builder 目录绝对路径
download_imagebuilder() {
  local version="$1"
  local target="rockchip-armv8"
  local file="immortalwrt-imagebuilder-$version-$target.Linux-x86_64.tar.zst"
  local url="https://downloads.immortalwrt.org/releases/$version/targets/rockchip/armv8/$file"
  local folder="immortalwrt-imagebuilder-$version-$target.Linux-x86_64"
  local marker="$folder/.ready"

  if [ -f "$marker" ]; then
    echo "$(pwd)/$folder"
    return 0
  fi

  # 如果目录存在但不完整，先清理
  if [ -d "$folder" ] && [ ! -f "$marker" ]; then
    echo "[WARN] found incomplete folder, cleaning..." >&2
    rm -rf "$folder"
  fi

  # 下载并覆盖同名压缩包
  wget -O "$file" "$url" >&2

  # 解压
  tar -I zstd -xvf "$file" >&2

  touch "$marker"

  echo "$(pwd)/$folder"
}


build(){
  # =============================================================
  #  设备 Profile
  #  可在 Image Builder 目录运行 `make info` 查看所有可用 profile
  # =============================================================
  PROFILE="friendlyarm_nanopi-r2s"

  # =============================================================
  #  自定义文件目录，映射到固件根文件系统
  # =============================================================
  FILES_DIR="files"

  SCRIPT_DIR="$(cd "$(dirname "$0")" && pwd)"
  BUILDER_DIR="${1}"

  # =============================================================
  #  固件输出目录
  # =============================================================
  OUTPUT_DIR="$BUILDER_DIR/r2s_output"
  PROJECT_OUTPUT_DIR="$SCRIPT_DIR/r2s_output"

  # =============================================================
  #  固件文件名附加标识，可留空
  # =============================================================
  EXTRA_IMAGE_NAME="r2s"

  # =============================================================
  #  根分区大小，单位 MB；留空则使用 imagebuilder 默认值
  # =============================================================
  ROOTFS_PARTSIZE="${2:-}"

  # =============================================================
  #  插件包列表
  #  - 前面加 - 表示从固件中移除该包，例如 -dnsmasq
  #  - 每行一个，方便增删注释
  # =============================================================
  PKG_LIST=(
    openssh-sftp-server
    vim-full
    nano-plus
    bash
    shadow-chsh
    curl
    luci-i18n-argon-config-zh-cn
    luci-i18n-package-manager-zh-cn
    luci-i18n-firewall-zh-cn
    luci-i18n-arpbind-zh-cn

    # 现代终端工具
    ripgrep
    diffutils
    less

    # 分区扩容
    luci-i18n-diskman-zh-cn
    cfdisk
    resize2fs
    e2fsprogs
    losetup

    # 代理插件
    luci-i18n-daed-zh-cn
    luci-i18n-homeproxy-zh-cn
    sing-box
  )

  PACKAGES=$(printf "%s " "${PKG_LIST[@]}")

  GREEN="\033[0;32m"
  YELLOW="\033[1;33m"
  RED="\033[0;31m"
  NC="\033[0m"

  echo -e "${GREEN}========================================${NC}"
  echo -e "${GREEN}   OpenWrt Image Builder 开始构建${NC}"
  echo -e "${GREEN}========================================${NC}"
  echo -e "  Device      : ${YELLOW}FriendlyARM NanoPi R2S${NC}"
  echo -e "  Target      : ${YELLOW}rockchip/armv8${NC}"
  echo -e "  Profile     : ${YELLOW}${PROFILE}${NC}"
  echo -e "  Files 目录  : ${YELLOW}${FILES_DIR}${NC}"
  echo -e "  输出目录    : ${YELLOW}${OUTPUT_DIR}${NC}"
  echo -e "  项目输出目录: ${YELLOW}${PROJECT_OUTPUT_DIR}${NC}"
  echo -e "  镜像标识    : ${YELLOW}${EXTRA_IMAGE_NAME}${NC}"
  echo ""

  cd "$BUILDER_DIR"

  mkdir -p "$FILES_DIR"
  # 复制 files 目录下的自定义文件到 Image Builder 的 files 目录
  if [ -d "${SCRIPT_DIR}/files" ]; then
    echo -e "${YELLOW}[提示] 复制自定义 files/ 目录到 Image Builder${NC}"
    cp ${SCRIPT_DIR}/files/* $BUILDER_DIR/files/ -rf
  else
    echo -e "${YELLOW}[提示] 未找到自定义 files/ 目录，跳过复制${NC}"
  fi

  if [ ! -f "Makefile" ]; then
      echo -e "${RED}[错误] 未找到 Makefile，请在 imagebuilder 根目录下运行本脚本！${NC}"
      exit 1
  fi

  mkdir -p "$OUTPUT_DIR"

  make image \
      PROFILE="$PROFILE" \
      PACKAGES="$PACKAGES" \
      FILES="$FILES_DIR" \
      BIN_DIR="$OUTPUT_DIR" \
      EXTRA_IMAGE_NAME="$EXTRA_IMAGE_NAME" \
      ${ROOTFS_PARTSIZE:+ROOTFS_PARTSIZE="$ROOTFS_PARTSIZE"}

  if [ $? -eq 0 ]; then
      if [ "$OUTPUT_DIR" != "$PROJECT_OUTPUT_DIR" ]; then
          if [ ! -d "$OUTPUT_DIR" ]; then
              echo -e "${RED}   未找到构建输出目录: ${OUTPUT_DIR}${NC}"
              exit 1
          fi

          if [ -e "$PROJECT_OUTPUT_DIR" ]; then
              BACKUP_OUTPUT_DIR="${PROJECT_OUTPUT_DIR}.bak.$(date +%Y%m%d%H%M%S)"
              if ! mv "$PROJECT_OUTPUT_DIR" "$BACKUP_OUTPUT_DIR"; then
                  echo -e "${RED}   备份已有输出目录失败: ${PROJECT_OUTPUT_DIR}${NC}"
                  exit 1
              fi
              echo -e "${YELLOW}   已有输出目录，已备份到: ${BACKUP_OUTPUT_DIR}${NC}"
          fi

          if ! mv "$OUTPUT_DIR" "$PROJECT_OUTPUT_DIR"; then
              echo -e "${RED}   移动构建输出目录失败: ${OUTPUT_DIR} -> ${PROJECT_OUTPUT_DIR}${NC}"
              exit 1
          fi
      fi

      echo ""
      echo -e "${GREEN}========================================${NC}"
      echo -e "${GREEN}   构建成功！${NC}"
      echo -e "${GREEN}   固件路径: ${PROJECT_OUTPUT_DIR}${NC}"
      echo -e "${GREEN}========================================${NC}"
  else
      echo ""
      echo -e "${RED}========================================${NC}"
      echo -e "${RED}   构建失败，请检查上方错误日志${NC}"
      echo -e "${RED}========================================${NC}"
      exit 1
  fi
}

# =============================================================
# 交互输入函数
# 参数1: 提示信息
# 参数2: 默认值
# 返回: 用户输入值，直接回车返回默认值
# =============================================================
ask_input() {
  local prompt="$1"
  local default="$2"

  read -p "${prompt} [ 默认: ${default} ]: " value

  if [ -z "$value" ]; then
    echo "$default"
  else
    echo "$value"
  fi
}

# 项目根目录，保证从任意位置执行 r2s.sh 都能找到其他资源
project_dir="$(cd "$(dirname "$0")" && pwd)"
cd "$project_dir"

# 要构建的 ImmortalWrt 版本, 可以在 https://github.com/immortalwrt/immortalwrt 查询版本号
default_version="25.12.1"
version=$(ask_input "请输入 ImmortalWrt 版本" "$default_version")

# 根分区大小(单位: MB)
default_rootfs_partsize="600"
rootfs_partsize=$(ask_input "请输入根分区大小(MB)" "$default_rootfs_partsize")

install_dependencies

builder_dir="$(download_imagebuilder "$version")"

build $builder_dir $rootfs_partsize